Windows Vista startup error message got a problem? Just fix it

October 25, 2020 by Owen Faunce


If you get a Windows Vista error message at startup, this guide will help you.

TIP: Click on this link to repair Windows errors and increase system performance.

General fixes when Windows does not start
  1. Reboot the computer.
  2. Press the F8 key until the Windows logo appears.
  3. From the Advanced Download Options menu, select Last Successful Configuration. Boot menu for advanced boot options.
  4. Press the enter key.






Reasons For This Error

The most common causes of this error are:

Reason 1. BCD is missing or damaged

One of the most common causes of this error is missing or damaged е BCD. This can happen due to typos, power outages, boot sector viruses, or manual BCD configuration errors.

Reason 2: the integrity of the file system is violated

For the same reasons, the file system itself can be damaged or corrupted. This happens even more often when the computer shuts down while important data is being written to the boot sector.

Reason 3. Les system files are corrupted

May 2021 Update:

We now suggest using this software program for your issue. Also, Reimage repairs typical computer system errors, defends you from file loss, malicious software, computer system failures and optimizes your Pc for maximum performance. You can fix your Pc challenges swiftly and prevent others from happening by using this software:

  • Step 1 : Download and install Computer Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista - Microsoft Certified).
  • Step 2 : Click on “Begin Scan” to uncover Pc registry problems that may be causing Pc difficulties.
  • Step 3 : Click “Repair All” to fix all errors.


System files can also be damaged or corrupted for the same reasons.

"Startup Repair Cannot Fix This PC Automatically"

Startup Repair is a built-in Windows tool that can be used to check and replace any missing or corrupted system files on your computer. Typically this tool is used when your computer cannot start correctly. However, many users have encountered a problem when using this utility: "Startup Repair cannot automatically fix this computer." This is an error message in Windows 7 or Windows Vista. Windows 10 is the same as "Automatic Repair Can't Fix Your PC."

Clicking the View Issue Details button in Windows 7 / Vista displays the following information. (The signature of the problem may appear on different operating systems on different operating systems.)

Problem event name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: Unknown
Problem Signature 04: 21200442
Problem Signature 05: AutoFailover
Problem Signature 06:65
Problem Signature 07: CorruptFile
OS Version: 6.1.7600.
Language ID: 1033

So why didn't boot recovery help? Usually, when you get an error, it might say:

  • The problem device is connected to your computer.
  • The file system of your system hard disk is damaged.
  • The hard disk master boot record (MBR) is corrupted.
  • Your hard drive may experience virus attacks, hard drive write errors, or power outages.

6 Fixes "Startup Repair Cannot Automatically Fix This PC" In Windows 10/8/7

If you're not sure why Windows Startup Repair failed, try these simple fixes first.

Method 1. Remove Devices

Based on information provided by Microsoft, if you recently connected a device such as a camera or portable music player to your computer, you can remove the device and restart your computer. Sometimes Windows cannot automatically repair the computer due to the connected device.

If this trick doesn't work, don't worry. There are many other options you can try.

Method 2. Run Bootrec.exe

Bootrec, also known as the bootrec.exe utility, is a tool provided by Microsoft in the Windows Recovery Environment. Bootrec.exe can be used to repair the Master Boot Record (MBR), Boot Sector, Boot Configuration (BCD), and boot.ini file. If the problem is caused by a damaged MBR or BCD, the solution is to repairerasing an MBR or BCD write using bootrec. By the way, this method requires a Windows recovery disc. Since you are using it during startup repair, here's how to start bootrec.exe. (Running bootrec.exe also helps resolve the Windows downloads loop.)

For Windows 7:

Step 1. Restart your computer and press "F8" when you see the Windows logo.

Step 2. Select "Repair your computer" in the advanced startup options.

Step 3. Select "Command Prompt" in the system recovery options.

Step 4. Enter the following commands in the following order:

Method 3. Run CHKDSK

As mentioned earlier, bad sectors and file system errors on your hard drive can be the cause of the "Startup Repair Cannot Fix Your Computer Automatically" error message. By running CHKDSK, you can check and fix hard disk errors, including bad sectors and file system errors.

Step 1. Restart your computer and press "F8" when you see the Windows logo.

Step 2. Select "Repair your computer" in the advanced p In launch parameters.

How do I fix Windows 7 failed to boot without disk?

Fix # 2: run the last known working configuration
  1. Reboot the computer.
  2. Press F8 repeatedly until a list of boot options appears.
  3. Choose the last known good configuration (optional)
  4. Press Enter and wait for it to start.

Step 3. Select "Command Prompt" in the system recovery options.

Step 4. Enter the following command:

"C" is the letter of your Windows installation drive.

Method 4: Run Windows System File Checker

Windows System File Checker can check and repair missing or corrupted Windows system files on your computer. Also, no Windows installation CD is required to use this tool. All you have to do is boot into Safe Mode from the command line.

Step 1. Restart your computer. Once launched, press F8 every second until the Windows logo is displayed.

Step 2. Then you will see the Advanced Boot Options menu. Below, select Safe Mode with Command Prompt.

Step 3. At the command prompt, enter the following command:

windows vista error message at startup

Step 4. Restart your computer.

Method 5. Perform A System Restore

If you created a Windows System Restore Point as a system backup on your Windows 10/8/7 PC, you have a choice Ability to completely restore your computer to its original state, at least to the previous state. System Restore is a Microsoft Windows feature that allows users to restore the state of their computer (including system files, installed applications, Windows registry, and system settings) to an earlier state. Thus, it can be used to troubleshoot system malfunctions or other problems.

Procedure 1. Recover important data from a dead PC

If you are stuck with “Startup Repair cannot fix this computer automatically” or “Automatic Repair cannot fix your computer” error messages on your Windows PC, do not rush to run Restoration System. Performing a system restore will return your computer to an earlier point known as a system restore point. Restore points are created when you install a new application, driver, or Windows update, or when you manually create a restore point. Recovery will not affect your personal files, butwill remove applications, drivers and updates installed after the restore point. Therefore, we strongly recommend that you test the powerful EaseUS Data Recovery Wizard with bootable media to remove your data from the current "dead" PC:

Note. This requires a working second computer.

Step 1. Create a bootable hard drive.

Prepare a blank USB drive. If you have important data, copy it to another device. If you create a bootable hard drive, the data on the USB stick will be deleted. EaseUS WinPE Edition Data Recovery Wizard helps you create a bootable hard drive. Connect the USB drive to your PC and run the EaseUS WinPE Edition Data Recovery Wizard. Select your USB drive and click Next to create a bootable hard drive.

Step 2. Boot from a bootable USB drive.

Connect your boot disk



RECOMMENDED:Click this link to repair Windows system errors and increase system speed






Related posts:

  1. How Do I Change Startup In Windows
  2. How To Remove Software From Startup In Windows Xp
  3. Where Is The Excel Startup Folder In Windows Xp
  4. How To Stop Programs In Startup In Windows 7
  5. Startup Computer In Safe Mode Windows 7
  6. Error Message When Installing Windows Xp Sp3
  7. Error Message Windows Explorer Has Stopped Working
  8. Rundll Exe Error On Startup
  9. How To Fix Winlogon.exe Error At Startup
  10. Spooler Error On Startup