How to fix BIOS opening in Windows 7?

November 16, 2020 by Logan Oppen


This guide will help you if you notice how to open BIOS in Windows 7.

TIP: Click on this link to repair Windows errors and increase system performance.

Turn on your computer. Press the BIOS key combination to open the BIOS on your computer. Common keys for opening BIOS are F2, F12, Delete, or Esc. Many computers display a key that must be pressed to enter the BIOS before loading the Windows 7 operating system.




: please

Do not make any

changes to your BIOS settings unless you fully understand the implications.

BIOS Tools

Basic input / output system

. This is software that checks the hardware status of your computer and lets you start Windows.

Your computer's BIOS performs a self-test (POST) every time it is turned on to ensure that the computer's peripherals are connected and working properly. Your computer will turn on normally if there are no problems, and your computer will control what operating system you have.

In BIOS, you can make changes, for example, you can set a password, control hardware, and change the boot sequence. The following instructions will show you how to easily access BIOS settings. However, DO NOT contribute any of thechanges if you are not sure they will work.

For Windows 7 and earlier For Windows 10 For Windows 7 and earlier

1) Turn on the computer. Pay particular attention to the first screen that appears. Look for a notification that tells you which key or key combination to press to access BIOS settings. You may see the following notifications: Click DELETE to access the configuration. BIOS settings: Esc; Setting = Delete or System Configuration: F2.

If this is the first time you miss this notification, just restart your computer.

Typically pressed key: F1, F2, F3, Esc, or Delete. If you are unsure, check with your computer manufacturer for an answer.

2) If you are sure which key or key combination to press to enter BIOS, restart your computer. Press the button to access the BIOS settings and you will be presented in BIOS after a few seconds.

Windows 10

Windows 8 and Windows 10 use Fast Startup. Therefore, when the system boots, you cannot press the function key to enter the BIOS setup program. Here's how to do it.

1) While holding down the Shift key, shut down the system.


Press and hold the

function key on your computer to enter BIOS settings.

F1, F2, F3, Esc, or Delete

September 2021 Update:

We now suggest using this software program for your issue. Also, Reimage repairs typical computer system errors, defends you from file loss, malicious software, computer system failures and optimizes your Pc for maximum performance. You can fix your Pc challenges swiftly and prevent others from happening by using this software:

  • Step 1 : Download and install Computer Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista - Microsoft Certified).
  • Step 2 : Click on “Begin Scan” to uncover Pc registry problems that may be causing Pc difficulties.
  • Step 3 : Click “Repair All” to fix all errors.


(contact your PC manufacturer or read user manual). Then press the power button.

Note. DO NOT release the function key until the BIOS screen appears.

how to open the bios in windows 7

3) You will find BIOS settings.

Part 1. What Is BIOS?

BIOS (short for Basic Input / Output System) is a program stored for a smallyour memory chip on the motherboard. The BIOS instructs the computer to perform a number of basic functions, such as startup and keyboard control. It is also used to test and tune your computer's hardware, such as: B. CPU, hard disk, floppy drive, optical drive, CPU, memory, etc.

F2 Key Method

  1. Turn on your computer.
  2. If you see a prompt to press F2 to access the setting, do so.
  3. The configuration screen appears.
  4. If this method does not work, repeat it, but hold down the F2 key.

F12 Key Method

  1. Turn on your computer.
  2. If you see a prompt to press F12, do so.
  3. Boot options are displayed with the option to call the installer.
  4. Scroll down using the arrow key and select .
  5. Press Enter.
  6. The configuration screen appears.
  7. If this method doesn't work, repeat but hold F12.

Utility For Toshiba Hardware

Toshiba Hardware Utility (HWSetup) can also bebut use to change some settings if F2 or F12 doesn't work. This method only works on some laptops.

  1. Click the Start button.
  2. Search for "HWSetup".
  3. Select HW Setup from the search results to open it.
  4. Make the necessary changes and select Apply.
  5. Restart your computer if you are not prompted to do so.

If the Toshiba Hardware Utility is not already installed, you can download it from // by clicking Downloads and choosing your computer information.

Esc Key Method

Turn on your computer. If you are not prompted to press the F2 key, immediately hold the Esc key for three seconds and then release. Press F1 when prompted. The configuration screen will appear.



RECOMMENDED:Click this link to repair Windows system errors and increase system speed

How do I boot into Windows BIOS?

To boot from UEFI or BIOS:
  1. Start the PC and press the manufacturer's button to open the menu. Frequently used keys: Esc, Delete, F1, F2, F10, F11, or F12.
  2. If Windows is already installed, from the login screen or from the Start menu, select Power ()> Hold down the Shift key and select Restart.

How do I set the default BIOS in Windows 7?

Reset BIOS to default settings (BIOS)
  1. Enter BIOS setup program. See Accessing BIOS.
  2. Press the F9 key to automatically load the factory default settings.
  3. Confirm your changes by choosing OK and pressing Enter.
  4. Press the F10 key to save changes and exit BIOS setup.






Related posts:

  1. Open Key Files In Windows
  2. How To Open Xterm In Windows
  3. Open Jar Files In Windows 8
  4. Cannot Open Security Center Windows 7
  5. Can Not Open Internet Explorer In Windows Xp
  6. How To Open The Command Prompt In Windows 7
  7. How To Open A Dos Command Window In Windows 7
  8. How To Open Recent Documents In Windows 7
  9. How To Open Registry Editor In Windows 7 64 Bit
  10. Open Access Denied Folder Windows 7