Is there a way to fix a CD-ROM directory error?

 

TIP: Click on this link to repair Windows errors and increase system performance.

In some cases, your system may display an error code that indicates a CD-ROM directory error. There can be many reasons why this problem occurs. The error "The directory name is incorrect" is a system problem that may prevent you from opening certain files or directories. You also cannot access storage devices, including SD card, external hard drive, USB drive, DVD, etc. Then you must save the files.

cd rom directory error

 

How do I mount a CD ROM?

To mount a CD or DVD on Linux operating systems:
  1. Insert the CD or DVD into the drive and enter the following command: mount -t iso9660 -o ro / dev / cdrom / cdrom. / Cdrom represents the mount point of a CD or DVD.
  2. Log off.

 

April 2021 Update:

We now suggest using this software program for your issue. Also, Reimage repairs typical computer system errors, defends you from file loss, malicious software, computer system failures and optimizes your Pc for maximum performance. You can fix your Pc challenges swiftly and prevent others from happening by using this software:

  • Step 1 : Download and install Computer Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista - Microsoft Certified).
  • Step 2 : Click on “Begin Scan” to uncover Pc registry problems that may be causing Pc difficulties.
  • Step 3 : Click “Repair All” to fix all errors.

download

 

CDs and DVDs use the ISO9660 file system. The goal of ISO9660 is to provide a standard for the exchange of data between different operating systems. As a result, any Linux operating system can handle the ISO9660 file system. This manual describes how to mount / assemble the ISO9660 file system on Linux and thus allow the user to read data from a CD or DVD.

CD / DVD-ROM Drive Detection

First, we need to find usable devices that can read ISO9660 data. In other words, we need to find the CD / DVD drives available on our Linux system. To do this, we can use the "wodim" command and the --devices option. wodim parses and generates symbolic device names found in the / dev / * directory:

After you run the wodim command and the CD / DVD device hardware is available on your system, you should see output similar to the following:

Based on the above output, we see that our CD-ROM / DVD-ROM drive is available in the symbolic location / dev / scd0.

It should also be noted that different systems can lead withdifferent ways. For example, on Debian Linux, the user who runs the wodim command must belong to the cdrom group. Otherwise, the wodim command will fail with an error message similar to the following:

Create Mount Point

Your Linux system may already have created a mount point for you. This is usually / cdrom, / media / cdrom, / media / cdrom0 or / mnt / cdrom. Otherwise, you can create your own mount point. Having a meeting place is absolutely necessary! The mount point represents the location from which data on a CD or DVD is made available to the user.

Integrate CD-ROM

If you do not belong to the CD-ROM group and therefore do not have permission to mount the CD-ROM, switch to the root user and run the following command:

Your CD-ROM is now mounted and accessible through the / media / cdrom directory. For now, just go to this directory to access your data.

Insert An Audio CD

Sometimes you want to listen to your favorite music, and trying to mount a music CD using the command above canIt can cause problems such as:

Indeed, music CDs do not contain the ISO9660 file system as such. In fact, the story is easier with music CD-ROMs than with data CD-ROMs using the iso9660 file system.

To listen to a music CD, simply insert the music CD (Compact Dics) into the CD-ROM / DVD-ROM drive and start your favorite music CD player. The only thing to worry about is whether the kdemultimedia-kio-plugins package for KDE or the gnome-media package for the gnome window manager are installed. With these packages you can listen to music from a CD.

If you see the contents of a music CD or want to convert certain pieces of music to MP3 / OGG format, just launch “KONQUEROR” and enter the storage location:

Allows Users To Mount From A CD-ROM

You can also authorize system users to mount a CD or DVD. To do this, modify the / etc / fstab file and add a line similar to the following:

Place The CD And Remove It

If you cannot unmount previously deployed If the CD is blank, make sure that you are not in the directory where your CD is deployed, or that another application is not using it.

If you still have problems unmounting the CD-ROM media, you can use the merge command to terminate all related processes on your device.

Troubleshooting

ISO9660 Support Test

Although it is highly unlikely that your system will not support this particular file system, here are some tips for testing the presence of ISO9660 on your Linux system.

If you have any problems, try to find the kernel modules loaded with the lsmod command or by reading the contents of the / proc / filesystem file:

Search results are currently unavailable. Please try again later or use one of the other support options on this page.

I tried all the answers here and more google results, but none helped. I finally realized the problem is that the file format is iso9660, not vfat.

Note: I reduced the list to the corresponding line. You can also see that the storage type iso9660, not vfat

Note: Kali told me to press ( Alt + F1 ), but that didn't work. I tried F1 in F5 until I found the right combination

In the menu, we say that the CD-ROM should be mounted by invitation, select / dev / sdc1 and / cdrom. I know that we already installed the player, but for some reason this step did not work before, but it worked well after the previous steps.

What Is An "invalid Directory Name"?

Error "The directory name is incorrect" is a system problem that may prevent you from opening certain files or directories. You also cannot access storage devices, including an SD card, an external hard drive, a USB drive, a DVD, etc.

To access your files and player, see below how to solve this problem. Then you must save the files. This is the only way to avoid data loss in the event of an error.

The Directory Name Is Invalid - How Can It Be Fixed Accordingly?

FIX 1. Change The Initial Value In The Command Line Properties

You will receive the message "Directory name is not valid in CMD" if youlaunch CMD with another user who uses the Run as function. To solve this problem, you can change the Start in value in the Command Line Properties dialog box.

FIX 2: Disconnect DVD Player

When you try to play a DVD on your computer, the directory name in the Windows 10 DVD drive may not be valid. To solve this problem, you can try disconnecting the DVD drive.

You can still try to repair or remove Windows Essentials. You can go to "Start"> "Settings"> "Applications"> "Windows Essentials", then click on the "Restore" or "Delete" button to start the process.

FIX 3: Connect Your Device To Another USB Port

If you insert an SD card, a flash drive and an external hard drive into your computer and try to install Windows 10 correctly or upgrade your computer from a previous version of the operating system to Windows 10, its directory name may not be valid on the SD / USB card / external hard drive ".

The simplest reason for this error is that you are connecting the device to an idle USB port. Therefore, if you have the same error with external storage devices, you can first try to connect your device to another USB port.

FIX 4: Create A New Simple Partition With Unallocated Space

This directory name error can occur when trying to access a USB drive or other external storage devices. In this case, you can create a new separate partition with unallocated space. Some users report that this method works correctly.

Step 1. Press Win + R to display the run window, enter diskmgmt.msc in the field and click OK to open disk management.

FIX 5: Error Checking Of A Hard Disk With Properties

If there are problems with the hard drive, the error "Directory name is invalid" may appear on external storage devices. If you are not sure if there is a problem with this hard drive, you can check its properties to see it.

Step 1. You can open this computer if a problem occurs, right-click on the hard drive and select "Properties" in the accountby the way menu.

Step 2. Go to the "Tools" tab and select "Check" in the "Error Check" section. It checks your hard disk for hard disk errors.

FIX 6: Update Hard Disk Drivers Using Device Manager

FIX 7: Directory Name Is Not Valid In Task Scheduler

If you have this problem with the task scheduler, you can add quotation marks to the file path. You can try removing quotes from the file path and save the changes. Then check if your problem is resolved.

If you have a system restore point, you can also perform a restore from a system restore point. This will return your computer to its previous working state.

How Do You Protect Your Files In Windows 7/8/10?

If the error message "Directory name is incorrect" appears in Windows 7/8/10, you may not be able to access the SD card, external hard drive, network drive, DVD, etc. To access files on these devices. To avoid this, you should back up important files or folders and keep them in a safe place.

1. A storage device for storing your files and folders. You can use an external hard drive, a USB drive, a cloud drive such as Dropbox, Google Drive, etc.

2. Backup and restore software. It is very important. Appropriate software can make it all easy. I recommend that you backup and restore AOMEI Backupper for free. This feature allows you to back up files with a specific extension, back up large files, back up files to an external hard drive, back up files to Google Drive, etc.

Step 1. Download free backup and recovery software - AOMEI Backupper Standard, i

 

 

How do I fix an invalid drive?

Invalid reader: D: \\).

Steps:
  1. Choose start.
  2. Select “Settings” (skip this step if you are using Windows XP).
  3. Click on the control panel.
  4. Double-click Administration.
  5. Double-click Computer Management.
  6. Select Disk Management.
  7. Right-click on the operating system, DVD or CD-ROM.
  8. Select Change drive letter and path.

 

RECOMMENDED:Click this link to repair Windows system errors and increase system speed

 

 

 

Tags

 

Related posts:

  1. Error Frs Not In Any Directory
  2. Cd Rom Error Directory Name Is Ivaid
  3. Apache Error Log Per Directory
  4. Core Ftp Le Error Loading Directory
  5. How To Set Directory Permissions In Windows Xp
  6. Windows System Directory C#
  7. Delete Corrupt Directory In Windows
  8. Troubleshooting In Active Directory 2008
  9. Windows Update Cache Directory
  10. How To Install Ctl3d32 Dll In The Windows System Directory